Final rule published

Airworthiness Directives; The Boeing Company Airplanes

Record date · Nov 2, 2026

What this means

Status
Final rule published
What happened
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD was prompted by a report that, during production, certain sealant installations within the center wing fuel tank did not receive required visual and adhesion inspections. This AD requires a detailed inspection of certain sealant installations in the left, right, and center wing side-of-body areas, an adhesion test of the s…
What to check next
The published rule gives Dec 7, 2026 as its effective date. Check the official docket for later changes.
Check the original record

About this record

The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD was prompted by a report that, during production, certain sealant installations within the center wing fuel tank did not receive required visual and adhesion inspections. This AD requires a detailed inspection of certain sealant installations in the left, right, and center wing side-of-body areas, an adhesion test of the sealant, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.

Record details

Federal Register document
2026-22318
Stated effective date
2026-12-07

Sources and related records

Source checked .