Final rule published

Airworthiness Directives; The Boeing Company Airplanes

Record date · Oct 27, 2026

What this means

Status
Final rule published
What happened
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-8, 737-9, and 737-8200 airplanes. This AD was prompted by a leak through the form-in-place (FiP) gasket found during a leak check. This AD requires a detailed inspection of the FiP gasket at the engine fuel shutoff valve access panel for correct sealant installation, or a detailed inspection at the engine fuel shutoff valve access panel for any damage on the pre…
What to check next
The published rule gives Dec 1, 2026 as its effective date. Check the official docket for later changes.
Check the original record

About this record

The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-8, 737-9, and 737-8200 airplanes. This AD was prompted by a leak through the form-in-place (FiP) gasket found during a leak check. This AD requires a detailed inspection of the FiP gasket at the engine fuel shutoff valve access panel for correct sealant installation, or a detailed inspection at the engine fuel shutoff valve access panel for any damage on the preformed seal, depending on configuration; a fluid leak test of the engine fuel shutoff valve access panel for any leak; and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.

Record details

Federal Register document
2026-21863
Stated effective date
2026-12-01

Sources and related records

Source checked .