Proposed rule

Airworthiness Directives; Pratt & Whitney RTX Corporation (Type Certificate Previously Held by Pratt & Whitney Division United Technologies Corporation) Engines

Record date · Oct 19, 2026

What this means

Status
Proposed rule
What happened
The FAA proposes to supersede Airworthiness Directive (AD) 2026-09-02, which applies to certain Pratt & Whitney RTX Corporation (PW) Model PW4074, PW4074D, PW4077, PW4077D, PW4084D, PW4090, and PW4090-3 engines. AD 2026-09-02 requires repetitive angle ultrasonic scan inspections (AUSIs) of the high-pressure compressor (HPC) 15th- stage disks, front turbine hubs, high-pressure turbine (HPT) 1st-stage air seals, and HPT 2nd-stage hubs for crack indications,…
What to check next
The published comment deadline is Dec 3, 2026.
Check the original record

About this record

The FAA proposes to supersede Airworthiness Directive (AD) 2026-09-02, which applies to certain Pratt & Whitney RTX Corporation (PW) Model PW4074, PW4074D, PW4077, PW4077D, PW4084D, PW4090, and PW4090-3 engines. AD 2026-09-02 requires repetitive angle ultrasonic scan inspections (AUSIs) of the high-pressure compressor (HPC) 15th- stage disks, front turbine hubs, high-pressure turbine (HPT) 1st-stage air seals, and HPT 2nd-stage hubs for crack indications, and removal from service and replacement if necessary, and for certain serial numbers, removal from service and replacement of the HPT 1st-stage air seal. Since the FAA issued AD 2026-09-02, the FAA was notified that a certain part number was omitted from AD 2026-09-02 and the applicability of the optional terminating action was matched to an unrelated requirement. This proposed AD would require repetitive AUSIs of the HPC 15th-stage disks, front turbine hubs, HPT 1st-stage air seals, and HPT 2nd-stage hubs for crack indications, and removal from service and replacement if necessary, and for certain serial numbers, removal from service and replacement of the HPT 1st-stage air seal. The FAA is proposing this AD to address the unsafe condition on these products.

Record details

Federal Register document
2026-21298
Stated comment deadline
2026-12-03

Sources and related records

Source checked .